LED strip light can be called led ribbon and LED tape. We named its strip light because the light shapes like a strip. The LED strip light has become the new star for wholesale LED panel light. The earliest process is to weld the LED onto copper cable and then put into PVC pipe directly. Later it was developed into the technology of FPC flexible circuit board, because of higher quality, longer life and higher lumen. Now let's get a close look at the LED strip light – the popular outdoor LED lighting products.

What are the main features of LED strip lights?
1.Soft, can be curled like wires.
2.Can be cut and connect.
3.As LED and FPC are completely encapsulated in flexible plastics, so LED strip light has good insulation and waterproof. You can use it safely.
4.With good weather resistance.
5.Hard to break, long lasting life.
6.widely used in the decoration of buildings , bridges , roads, gardens, patios , floors, ceilings , furniture , cars, ponds , underwater , advertising signs.
7.Easy to make it into different shapes.

You may ask why LED stripe light in LED fluorescent tube for sale industry is so popular nowadays. One reason is its long lifespan. Because LED is a constant current device, the lasting life is different among manufacturers with different constant effect. Of course, the led chip, PCB board, silicon glue, assembling process etc. will all affect the quality of final product.

If the LED stripe light is broken down accidently, what should we pay attention on the led strip repairing? Here is the answer.
1.You need to do some anti-static measures, such as wearing a wrist strap and anti-static gloves, etc. Because LED is an electrostatic and sensitive component, we should take anti-static measures before repairing, or it will burn LED.  

2.You need to prevent the light under continuous high temperature. The two important components - FPC and LED are not sustainable under high temperature.  High temperatures will make the FPC blistering. Meanwhile, LED cannot be sustained withstand high temperatures. If it works at high temperature for a long time, the chips will be burned. Therefore, soldering iron must be put in a limited temperature range without changes and casual setting. In addition, stay iron on the LED flood lamp wholesale pin within 10 seconds, or it will burn the LED chips.

3.You need to pay attention to short-circuit current. Lots of defects causing by short circuit at the pin, so we must identify real defect reason before repairing. Otherwise, after hastily replacing the bad LED, when energized again will breakdown the LED chips due to short-circuit current.

This is the introduction about the new star for LED outdoor lighting - LED strip light. if you have more questions about LED strip light, you can visit wholesale LED street lights for more information.